• 4-station rapid tri-chemistry battery charger with microprocessor / IC control
• Charges the battery externally. Battery has to be removed from the scanner/printer unit before placing into charging compartment
• Automatically detects Ni-Cd, Ni-MH and Li-ion chemistry battery packs, and delivers optimal charge program
• Charges most batteries in 1 to 4 hours. (Please refer table below for charging time)
• Switches to trickle charge mode when batteries are fully charged
• Protects batteries from overcharging, prolonging battery life
• Detects defective batteries
• With interchangeable / upgradeable adapter cups to fit most barcode scanner/portable printer battery models.  Ability to charge different battery models (with similar voltage) using interchangeable adapter cups. Please refer table below for charging cups option
• Supports universal voltage 100V ~ 240V AC input; 12V DC 4.0A+ output
• Powers with an external switch mode AC/DC adapter (UL, CE, RoHS certified) with America(US) 3-prong plug type
• Charge current: 1000mA~1500mA ±10% ( depends on battery type)
• Orange "PWR" light turns on when charger is connected to power outlet. Green "OK" light flashes once indicating self-test mode completes and charger is ready to charge
• Red "CHG" light turns on when battery is inserted indicating battery is charging. Green "OK" light turns on when battery is fully charged and battery is ready to use. Charger automatically switches to trickle charge mode until battery is removed
• Red "CHG" light flashes if charging defective battery
  

Charger includes 4 adapter cups. Choose 4 adapter cups from table below and please specify the cup models at the "Special Instructions" section during the checkout process.  

Additional adapter cup is available for $15 each.  Please contact us via email/phone to purchase additional adapter cup.  For your convenience, the adapter cup will be installed on the charger unit prior to shipping.  

Charging Cup Option and Compatibility List:

**The standard charger circuit is designed to charge nominal 7.2/7.4V battery packs. Adapter cups indicated by an asterisk (*) are for charging nominal 3.6/3.7V battery packs, and make use of a different specification internal circuit board and connector. When replacing adapter cups, please note that these 3.6/3.7V adapters cannot be connected to the standard 7.2V/7.4V internal circuit board, and vice versa. If you wish to purchase additional cup adapter, please make sure the adapter cups have the same voltage (either 3.6/3.7V or 7.2V/7.4V).

Approximate Charging Time: